3dSynth

Docs / SynthBlocks

Open in the interactive docs reader

Set Flow

Sets the extrusion flow multiplier. Controls how much filament is pushed through the nozzle.

Block

Interactive preview is available in the interactive reader.

Parameters

value
Flow multiplier. 1.0 = 100% (normal extrusion). 1.2 = 120% (thicker walls). 0.8 = 80% (thinner walls). Accepts math expressions.

How it works

Set Flow adjusts the extrusion amount relative to the calculated default. A value of 1.0 means normal extrusion. Higher values push more filament (thicker, stronger walls), lower values push less (thinner, more translucent walls).